Paljet 
. Product Positioning & Application Fields
Paljet supplies fully forged fan rotor shafts and heavy-duty gear shafts with continuous metal grain flow, outstanding fatigue resistance and torsional strength.
45# Fan Rotor Shaft:
Carbon structural steel with good cost performance. After quenching & tempering, it has stable mechanical properties, used for medium & light load fans such as induced draft fans, ventilation fans and dust removal fan main shafts.
40Cr Gear Shaft:
For medium-load transmission. Treated by quenching & tempering plus gear tooth induction hardening, widely used in general reducers, medium-small fan gearboxes and material handling equipment.
20CrMnMo / 20CrNi2Mo Gear Shaft:
Heavy-duty carburizing gear steels. After carburizing and quenching, the gear surface achieves high wear resistance while the core maintains high toughness for heavy shock and cyclic loads. Applied in mining, metallurgy, cement, high-power fans, heavy reducers and construction machinery.
Industries: Metallurgy, mining, cement, waste water treatment, power, general machinery, fan equipment, port cranes, construction machinery.
2. Process Capability Overview
Full workflow: Billet cutting → heating → open die forging (upsetting, drawing, stepped forging, controlled forging ratio to maintain continuous grain flow) → post-forging normalizing / stress relief annealing → rough machining → heat treatment (quenching & tempering / carburizing & quenching + tempering) → straightening → finish machining (turning, keyway milling, gear hobbing / gear grinding) → surface finishing → NDT inspection.
Capabilities
Materials: 45# carbon steel; alloy steel 40Cr; carburizing gear steel 20CrMnMo, 20CrNi2Mo.
Product range: fan rotor main shafts, stepped shafts, integral gear shafts.
Machining: OD, steps, keyways, splines, gear hobbing & grinding; tight control of concentricity, runout and straightness.
Heat treatment options: normalizing, annealing, quenching & tempering, tooth induction hardening, full carburizing quenching; hardness adjustable per requirement.
Delivery options: raw forging blanks, semi-finished or fully finished machined shafts.
3. Quality Control & Inspection
Manufactured under ISO9001 quality system, full inspection from raw material to finished product:
Raw material incoming inspection: heat number verification, PMI spectral analysis, material certificate review.
In-process forging inspection: visual check, dimension and forging ratio record.
Heat treatment test: Brinell / Rockwell hardness test; tensile & impact test and metallographic analysis on samples.
Non-destructive testing: UT ultrasonic test for internal shrinkage, inclusion and internal cracks; MT magnetic particle test for surface/subsurface cracks, complying with GB or ASTM as requested.
Dimensional & geometric inspection: OD, length, runout, concentricity, keyway and gear precision checked by dial gauge or CMM.
Visual final inspection. Documents including MTR, heat treatment report, NDT report and dimensional records supplied with shipment.
4. Customization Process
Inquiry: Customer provides drawings or specs including dimensions, material grade, rotating speed, load, hardness, heat treatment, gear accuracy and NDT requirements.
Technical evaluation: Jiayang reviews forging feasibility, recommends material & heat treatment solution and submits quotation.
Technical confirmation: Drawing, tolerance, inspection and acceptance criteria mutually agreed.
Production schedule: billet cutting → forging → heat treatment → straightening → machining → gear cutting → NDT.
Final inspection: complete dimensional, mechanical and NDT tests, full quality documents prepared.
Packing & delivery: anti-rust treatment, wooden pallet / crate packing, sea or land transport, after-sales technical support available.
Note: The above information is reviewed by Engineer Song Enyu from PALJET.
Next product: 42CrMo Forged Wheels