KOSO 374 Series Electronic Actuator |PALJET

Detailed Introduction
KOSO 374 Series Electronic Actuator

KOSO 374 Series Electronic Actuator

ML Series (Linear)
Motion mode: Linear thrust output.
Applicable valves: Linear valves requiring frequent adjustment, such as single-seated valves, sleeve valves, etc.
Historical correlation: This corresponds to the 371L and 372L models in the previous table. Among them, 371L (40000N large thrust) and 372L (10000N smaller thrust) are highly suitable for linear control valves requiring high-precision adjustment.
2. M Series (Multi-turn)
Motion mode: Multi-turn rotary output.
Applicable valves: Gate valves, globe valves, etc. (valves that require multiple turns to fully open or close).
Features: Can be used directly as a matching unit, or torque can be amplified by configuring a worm gear reducer, making it suitable for large-diameter or high-differential pressure gate/globe valves.
3. P Series (Quarter-turn)
Motion mode: Quarter-turn (usually 90° rotation).
Applicable valves: Larger ball valves, butterfly valves, etc.
Features: By configuring a quarter-turn gearbox, it can output higher torque, making it suitable for medium to large angular stroke valves with higher torque requirements. Corresponds to the 371R (5000Nm) and other larger torque models in the previous table.
4. Q Series (Quarter-turn - Compact)
Motion mode: Quarter-turn (90° rotation).
Applicable valves: Small to medium-sized ball valves, butterfly valves, and other 90° rotary valves.
Features: Compact in size, can be used directly as a matching unit, and is the preferred choice for economical or space-constrained scenarios. Corresponds to the 372R (600Nm) and other smaller torque models in the previous table.
Specification
Type 374ML 374M 374P 374Q
Input control singnal 1.Analog signal: DC 4-20mA (input impedance 250Ω, rising characteristic), other types can be optionally configured (such as DC 1-5V, etc.).2.Switching signal: Passive dry contact, DC 24V or AC 220V.3.Fieldbus signal: Supports Modbus-RTU, Profibus-DP V0/V1, HART, FF, etc. (This perfectly corresponds to the "adaptable bus interface" promoted in the previous picture, and the onfiguration is very rich).
Output control singal 1.Analog signal (feedback): DC 4-20mA, load resistance ≤750Ω, temperature effect ≤0.1%/10k, rising characteristic.2. Digital signal (relay output): Up to 9 groups of isolated relay outputs, contact capacity is 3A 250VAC or 3A 30VDC. (Can meet complex interlocking control requirements)
(Max. output 100000N 10000Nm 250000Nm 1800Nm
Power source 1.Three-phase three-wire AC380V±10% 50Hz, ±1%, harmonic content <5%. (Suitable for high-power industrial sites)2.Optional power supply: DC24V, 48V, 84V.3.Other AC power supplies: AC110V, 220V, 380-660V, 50Hz/60Hz (if these non-standard power supplies are required, please specify when ordering)
Deadband Adjustable from 0.5% to 5.0%
Ambient Temperatur Standard: -25℃ ~ +60℃ .Optional: -40℃ ~ +70℃ (Adaptable to extreme cold or high-temperature environments).
Explosionproof grade Protection rating: IP67, IP68 (2 meters underwater for 2 hours). (Top-tier protection capability, can be submerged in water for a short period).Explosion-proof rating: Ex db IIC T4 Gb. (Updated compared to the ExdIIBT4/ExdIICT4 standard in the previous table, belongs to the highest level of IIC flameproof protection, suitable for environments containing the most dangerous gases such as hydrogen and acetylene).
Anshan Leibo Metallurgical Equipment Manufacturing Co., Ltd. Registered Address:Yanlangzhai Village, Dadaowan Town, Qianshan District, Anshan City, Liaoning Province, P.R.China . All Rights Reserved © 2026