Actuators and Valves Catalog
Electronic Actuators
Electronic‑Hydraulic Actuators
Pneumatic Actuators
Valves+Actuators
Valves
Valve & Actuator Integration Project References and applications
501G Sleeve-guided Control Valve
(3610L Linear Stroke Electric Actuator,WCB valve body, 316L sleeve and valve core)
Semiconductor material plant, ultrapure water preparation workshop, reverse osmosis RO system inlet water flow regulation, stable control of inlet pressure and flow, protecting the reverse osmosis membrane modules; there is no instrument compressed air source on site;Operating Parameters.Medium: RO feed water purification water.Nominal Diameter: DN50;Upstream Pressure: 1.1 MPa; Downstream Pressure: 0.6 MPa;Operating Temperature: 25℃ normal temperature;Control Signal: DC4~20mA analog regulation
Protection Class: IP65; ordinary non-explosion-proof area.
400H High-Pressure Forged Steel Gate Valve (Multi-Turn)
(Series 3720 Intelligent Multi-Rotary Electric Actuator,Forged Steel Valve Body)
300MW thermal power plant boiler feedwater system, an isolation gate valve is installed on the boiler feedwater main header, used to cut off the feedwater during boiler startup, shutdown, and maintenance; there is no instrument compressed air source on site;Operating Parameters
Medium: Boiler deaerator feedwater
Nominal Diameter: DN250
Operating Pressure: 16.0 MPa
Operating Temperature: 280℃
Control Signal: On-off signal + 4~20mA valve position feedback, HART supported
Protection Class: IP67, no explosion-proof requirement, non-explosion-proof area of the power plant.
710C triple eccentric metal hard-sealed butterfly valve (3730 Series Angular Stroke Electro-Hydraulic Actuator,angular stroke 90°,710C triple eccentric metal hard-sealed butterfly valve)
Blast furnace system of a large-scale steel integrated enterprise, blast furnace gas main pipe, gas sent to heating furnace. There is no stable and clean instrument compressed air source on site;Operating conditions
Medium: Blast furnace gas (containing iron oxide dust)
Nominal diameter: DN800
Operating pressure: 0.12 MPa
Operating temperature: 220℃
Control signal: 4~20mA continuous
500M High-Pressure Balanced Sleeve Control Valve (4800 Series Linear Stroke Electro-Hydraulic Actuator,WCB thickened valve body, hard alloy cladding sleeve and core)
In the syngas pretreatment section of a coal chemical enterprise, the high-pressure feed gas needs to be stably depressurized to control the inlet gas flow of the downstream reactor; there is no available instrument compressed air source on-site;Operating conditions
Medium: Dust-containing synthetic raw gas
Upstream pressure: 9.2 MPa, downstream pressure: 3.0 MPa, pressure differential up to 6.2 MPa
Operating temperature: 210℃
Control signal: 4~20mA, DCS remote regulation
Explosion-proof rating: Exd II CT4
501G sleeve-guided control valve(5200LA multi-spring pneumatic diaphragm actuator)
Fine chemical plant, synthesis reaction unit, liquid-phase raw materials enter the synthesis tower, and it is necessary to stably control the feed flow rate to maintain the reactor temperature and reaction conversion rate.Operating conditions
Medium: Organic mixed liquid
Upstream pressure: 1.8 MPa, Downstream pressure: 0.6 MPa
Operating temperature: 85℃
Control signal: 4~20mA, DCS remote regulation
Explosion-proof rating Exd II CT6
Actuator Selection Ideas
How to Select Electronic, Electro-Hydraulic And Pneumatic Actuators
1.If there is a gas source, prioritize pneumatic actuation; fault safety is the most reassuring;
2.If there is no gas source, choose electric actuation when the load is not large;
3.If there is no gas source, for high pressure, heavy load and strong vibration, directly use electro-hydraulic actuation.
How to Select Electronic Actuators 3610,3710,3720,374 Series
1.Limited budget, only 4–20mA, general non-critical control loop → 3610
2.Small valve, HART requirement, compact space → 3710
3.Vast majority of projects, critical control loop, requires HART and diagnostics, moderate thrust → 3720 (Preferred)
4.High differential pressure, large valve, large unbalanced force, requires full suite of advanced valve diagnostics and predictive maintenance → 374
How to Select Electro-Hydraulic Actuators 3730,4800 Series
1.No air source, ball valve and butterfly valve with high torque → 3730 electric-hydraulic angular stroke
2.No air source, high pressure drop sleeve / single-seat control valve → 4800 electric-hydraulic linear stroke
How to Select Pneumatic Actuators 5000,6000,7000 Series
1.Standard linear control valve, pursuing high precision adjustment, small pressure differential → 5000 diaphragm
2.Linear valve, high pressure differential, large diameter, requires huge thrust, long stroke → 6000 piston cylinder
3.Ball valve, butterfly valve, eccentric rotary valve, 90° rotation → 7000 rotary actuator
How to Select Valves Matching KOSO 3610, 3710, 3720, 3730, 4800, 5000, 6000, 7000 Series Actuators
1.With air source, normal linear stroke control valve → 5000 pneumatic diaphragm
2.With air source, linear stroke high differential pressure → 6000 pneumatic piston
3.With air source, ball valve butterfly valve → 7000 pneumatic angular stroke
4.Without air source, small and medium load control → 3610/3710 electric
5.Without air source, gate valve multi-turn → 3720
6.Without air source, high differential pressure ultra-large thrust linear stroke → 4800 electro-hydraulic
7.Without air source, ultra-large torque butterfly valve ball valve → 3730 electro-hydraulic
Partner Certifications
The displayed certificates are official documents issued for KOSO’s valve and actuator production lines. They verify consistent quality control, material traceability, performance testing and compliance with widely recognised industrial standards for process automation.As Paljet, we supply genuine KOSO control valve solutions with full original test reports and certification packages. Our engineering team reviews project specifications to ensure selected KOSO models match your operating conditions. Whether for new plant construction, maintenance retrofits or spare part replacement, we deliver documented, auditable products that satisfy client QA, third-party inspection and regulatory requirements across Southeast Asia and global markets.
Anshan Leibo Metallurgical Equipment Manufacturing Co., Ltd. Registered Address:Yanlangzhai Village, Dadaowan Town, Qianshan District, Anshan City, Liaoning Province, P.R.China . All Rights Reserved © 2026