KOSO 5000 Series Pneumatic Actuators | PALJET

Detailed Introduction
KOSO 5000 Series Pneumatic Actuators

KOSO 5000 Series Pneumatic Actuators

5200LA Linear Diaphragm Actuator
**Features**
Multi-spring design, compact & lightweight, linear stem output. Direct / reverse action available, configurable for fail-open / fail-closed. Multiple spring ranges optional. High sensitivity, low air consumption. Works with KGP5000 smart positioner for 4~20mA / HART high precision modulation. Compatible with handwheel, limit switch, valve position transmitter, air lock-up valve.
**Applications**
Petrochemical, refinery, thermal power boiler feed water & steam control, water treatment, pulp & paper, metallurgy. For globe, single-seat, cage and angle control valves; continuous regulation of liquid, steam and gas under medium pressure drop.
5200RA Rotary Diaphragm Actuator
**Features**
Multi-spring diaphragm, converts linear force to 90° rotary torque. Smooth modulating action without impact. Torque range:46.4 ~553.7 N·m. Fail-safe by spring return. Compatible with KGP smart positioner, handwheel and accessories. Designed for continuous throttling, not for fast on/off cut-off.
**Applications**
Butterfly valves, eccentric rotary plug valves, modulating ball valves for large pipeline flow & pressure control. Widely used in flue gas, circulating water, industrial gas and water utility systems.
5300LA Heavy-duty Linear Diaphragm Actuator
**Features**
Heavy-duty high-thrust linear actuator, much higher output force than 5200LA. For high unbalanced valve force & high pressure drop service. Longer stroke available. Robust construction, good vibration resistance. Matched with KGP5000 for high accuracy modulation, requires higher air supply pressure. **Applications**
High differential pressure control valves in petrochemical, coal chemical, power plant main steam & high pressure feedwater. Applied when 5200LA thrust is insufficient to overcome valve unbalanced force.
General Remarks: All three models are spring return pneumatic diaphragm actuators. Positioner is required for 4~20mA electric signal control
Specification
Item 5200LA Linear Diaphragm Actuator 5200RA Rotary Diaphragm Actuator 5300LA Heavy-duty Linear Diaphragm Actuator
Input Signal (with KGP5000) DC 4~20mA, HART7 optional
Pneumatic Input Signal (Actuator Body) 20~100 kPaG (standard); optional 80~200kPaG /120~300kPaG
Output Signal (Valve Position Feedback) DC 4~20mA (optional)
Output Type Linear Thrust Rotary Torque, 90° Heavy-duty Linear Thrust
Max Output Force / Torque Depends on diaphragm size 2186N ~16475N Higher thrust than 5200LA, typical 22~45kN
Power Supply (Positioner, 2-wire) DC 12~40V, typical DC24V
Air Supply Pressure 140/300/340kPaG based on spring range 300~400kPaG recommended
Dead Band (KGP5000 package) ≤0.2%FS
Hysteresis (KGP5000 package) ≤0.3%FS
Linearity (KGP5000 package) ±0.5%FS (typical ±0.3%FS after auto-tune)
Air Consumption Static: ≤0.015 Nm³/h @140kPaG Dynamic: 0.1~0.8 Nm³/h (size dependent) Static: ≤0.015 Nm³/h @140kPaG Dynamic: higher for large diaphragm
Explosion Proof Ex d IIC T6 Gb / Ex ia IIC T6 Ga (optional)
Anshan Leibo Metallurgical Equipment Manufacturing Co., Ltd. Registered Address:Yanlangzhai Village, Dadaowan Town, Qianshan District, Anshan City, Liaoning Province, P.R.China . All Rights Reserved © 2026