KOSO 501T/501G/550G/510D Series valves | PALJET

Detailed Introduction
KOSO 501T/501G/550G/510D Series valves

KOSO 501T/501G/550G/510D Series valves

✅ 501T Top-Guided Single-Seat Control Valve
Features: Simple structure, top-guided unbalanced valve plug; compact size, supports bellows seal, jacket, and extended bonnet; small to medium orifice, cost-effective compared to sleeve valves.
Applications:
Small to medium orifice, medium to low differential pressure process fluids; steam, water, oil products; corrosive media; vacuum conditions; conventional control not requiring ultra-large Cv. Not suitable for extremely high differential pressure, as the unbalanced valve plug generates high thrust under high differential pressure.
✅ 501G Sleeve-Guided Pressure-Balanced Control Valve
Features: Sleeve-guided + pressure-balanced valve plug, low thrust and good stability under high differential pressure conditions; high flow capacity, vibration resistant; strong versatility, a main valve in the chemical industry.
Applications:
Chemical, petrochemical, and power plants; liquids / gases / steam; continuous control under medium to high differential pressure; dirty media, general erosion conditions; large orifice conventional process loops.
✅ 550G Large Orifice Sleeve-Guided Control Valve
Features: An upgraded large Cv version of the 501G, featuring the same sleeve pressure-balanced structure, larger Cv under the same differential pressure, optimized valve body flow path, suitable for large flow rates.
Applications:
Large flow rate, medium to high differential pressure conditions; boiler feedwater, circulating water, large flow rate process gases; scenarios requiring a large Cv without wanting to select a larger valve body.
✅ 510D Multi-Stage Pressure-Reducing Sleeve Control Valve (Anti-cavitation / Low noise)
Features: Multi-stage labyrinth sleeve, fluid pressure is reduced stage by stage, suppressing cavitation and significantly reducing fluid noise; pressure-balanced valve plug.
Applications:
High differential pressure high-risk conditions: anti-cavitation for liquids (condensate, high-pressure feedwater); noise reduction for high-pressure steam / gases; blowdown, temperature and pressure reduction loops; high differential pressure control loops in petrochemical and power plants.
Specification
Item 501T 501G 550G 510D
Valve body type Globe type,Top-guided single seat Globe type,Cage-guided Globe type,Cage-guided Globe type,Multi-stage cage guided
Nominal Diameter(mm) DN15~DN200(½"~8") DN40~DN450(1½"~18") DN25~DN450(1"~18")
Medium temperature -196℃ ~ +538℃
Flow characteristic Linear / Equal percentage / On-off Modified Linear / Modified EQ%
Ambient Temperature -40℃ ~ +80℃
Adjustable ratio 30:1 ~ 50:1 50:1
Valve body material SCPH2/WCB、SCPH21/WC6、SCPL1/LCB、SCS13A/CF8、SCS14A/CF8M SCPH2/WCB、SCPH21/WC6、SCPL1/LCB、SCS13A/CF8、SCS14A/CF8M、CF3M
Valve plug Single seat plug Pressure balanced cage plug Large Cv pressure balanced plug Multi-stage pressure balanced plug
Stellite overlay Seat leakage Valve core / seat can be optionally cladded with Stellite, resistant to erosion and cavitation Valve core, sleeve, and seat with optional Stellite cladding Valve core, sleeve, and seat with optional Stellite cladding Multi-stage sleeve + valve core can be hardfaced with Stellite
Seat leakage Metal seat:ANSI Class IV;Soft seat:ANSI Class VI Metal seat:ANSI Class IV
Connection type colspan="2">RF Flanged Flanged (RF/RTJ)、BW、SW; ≤2" prioritize SW, ≥3" prioritize BW Flanged(RF/RTJ)、BW、SW
<
Anshan Leibo Metallurgical Equipment Manufacturing Co., Ltd. Registered Address:Yanlangzhai Village, Dadaowan Town, Qianshan District, Anshan City, Liaoning Province, P.R.China . All Rights Reserved © 2026