Detailed Introduction
KOSO 300 Series valves
✅301K Full Bore Soft-Seated Ball Valve
Features: Full bore, extremely low flow resistance, PTFE soft seat, airtight shut-off; fast response; suitable for clean media; not suitable for high temperature and strong particle abrasion.
Applications: Petrochemical, water treatment, utility clean gas / liquid; quick shut-off + flow regulation; solvents, water, compressed air.
✅300W Metal Hard-Seated Ball Valve
Features: Ball + seat Stellite / tungsten carbide overlay, self-cleaning scraping structure, particle resistant, wear resistant and high temperature resistant; metal-to-metal seal; can withstand slurry and dust-containing media.
Applications: High temperature steam, powder-containing / fine particle slurry, coal chemical, residue oil, high temperature process media; regulation + tight shut-off.
✅300T/L Top-Guided Single-Seat Globe (Straight-Travel Control Valve)
Features: Top-guided single-seat valve, simple structure, good stability; linear / equal percentage flow characteristics; suitable for continuous precision regulation; can be configured with Stellite overlay for cavitation resistance.
Applications: Chemical, power plant steam, clean liquid / gas phase precision regulation; no large solid particle working conditions; continuous control from low to medium pressure differential.
✅300R PTFE/FEP Lined Corrosion-Resistant Ball Valve
Features: All media-contact surfaces PTFE/FEP lined, strong resistance to strong acids, strong alkalis and strong corrosion; metal shell pressure-bearing; lined temperature limit is not high.
Applications: Hydrochloric acid, hydrofluoric acid, strong oxidants, corrosive waste liquid; chemical anti-corrosion circuits; regulation and shut-off of corrosive media; strictly prohibited high temperature and particle erosion.
Specification
| Item |
301K |
300W |
300T/L |
300R |
| Valve body type |
Straight through full bore ball valve |
Metal seated hard seal ball valve |
Top-guided globe valve |
Lined ball valve (PTFE/FEP lining) |
| Nominal diameter |
DN15~DN400(1/2"~16") |
DN15~DN300 |
DN15~DN200(1/2"~8") |
DN15~DN200(1/2"~8") |
| Nominal pressure |
ANSI Class150/300;JIS10K~40K |
ANSI Class150/300;JIS10K~40K |
ANSI Class150~600;JIS10K~40K |
ANSI Class150;JIS10K |
| Medium temperature |
-45℃ ~ +250℃ (Upper limit of PTFE soft seal) |
-45℃ ~ +450℃ (Metal Hard Seal) |
-45°C ~ +450°C (standard); low-temperature version can reach -196°C |
10℃ ~ +150℃ (lining limitation) |
| Flow characteristic |
Approx. Equal percentage / On-Off / Adjustable |
Approx. Equal percentage / On-Off |
Linear / Equal percentage / Linear |
Approx. Equal percentage / On-Off |
| Adjustable ratio |
50:1 |
30:1 |
| Valve body material |
SCPH2(WCB), SCS13A(CF8), SCS14A(CF8M) |
SCPH2 (WCB), SCS13A (CF8), SCS14A (CF8M), WC6 optional |
Outer shell: FC250 / SS400 / SUS304 Wetted: PTFE / FEP full lining |
| Valve plate / Ball |
SUS316 / SCS13A polished sphere |
Sphere + Seat Stellite / Tungsten Carbide Supersonic Spraying |
SUS316 plug, optional Stellite cladding |
Substrate SUS316, fluid side PTFE/FEP coated ball |
| Stellite overlay Seat leakage |
Optional (no standard soft seal; Stellite cladding optional for metal seat) |
Standard Standard Stellite / Tungsten Carbide Hardened Layer |
Optional valve core / valve seat cladding with Stellite |
❌ Not available (liner structure, not weldable) |
| Connection type |
RF Flanged |
RF/RTJ flange, SW socket welding, BW butt welding |
RF Flanged Flange; Small-bore Clamped Wafer |
Anshan Leibo Metallurgical Equipment Manufacturing Co., Ltd. Registered Address:Yanlangzhai Village, Dadaowan Town, Qianshan District, Anshan City, Liaoning Province, P.R.China . All Rights Reserved © 2026