Mitsubishi Steam Turbine HP-IP Outer Casing Casting|Paljet Heavy Equipment Parts

Detailed Introduction
Mitsubishi Steam Turbine HP-IP Outer Casing Casting

Mitsubishi Steam Turbine HP-IP Outer Casing Casting

    1. Product Position & Application
Mitsubishi HP-IP (High-Pressure & Intermediate-Pressure) outer casing is the outer pressure-bearing steel casting of double-shell steam turbine for large thermal power units. It is a critical core component responsible for high-temperature & high-pressure steam sealing, structural support and thermal expansion positioning. The casing operates continuously under working temperature above 570℃, requiring excellent creep resistance, compactness and structural rigidity. As a certified strategic supplier of Mitsubishi Heavy Industries, FuAn Heavy Industry provides integrated solutions including casting and finish machining for new thermal power projects, unit retrofits and spare part replacement.
Application: Supercritical / Ultra-supercritical thermal power steam turbine units; thermal power plant new construction, unit upgrading & spare parts replacement; overseas EPC power projects.
Typical dimension: Total length approx. 5500 mm, width 3400 mm, max inner cavity diameter 1800 mm. Extremely strict tolerance requirements on split plane and bearing bores.
2. Manufacturing Capability Overview
We deliver full one-stop workflow: casting, heat treatment, qualified welding repair, multi-axis CNC precision machining and pre-assembly. MAGMA casting simulation is applied at early stage to avoid shrinkage, porosity and deformation. Digital casting simulation: 3D modelling & MAGMA solidification simulation to optimize gating, riser and chiller layout, predict hot cracks and casting distortion. Melting & resin sand casting: Electric arc furnace + LF/VD refining to control gas and impurity content. Resin sand moulding and core assembly with chiller arrangement for directional feeding to guarantee dense structure on pressure-bearing zones. Multi-stage heat treatment: Normalizing, tempering and stress-relief annealing to homogenize microstructure, remove casting stress and improve high-temperature creep performance. Qualified welding repair: Welding performed by certified welders, followed by post-weld heat treatment in compliance with Mitsubishi specifications. Multi-axis CNC precision machining: Large CNC gantry milling & floor boring machine for split plane, flange, inner cavity and bearing seat. Key tolerances: split surface flatness ≤0.02 mm; step offset after upper/lower half assembly <0.07 mm; bearing bore coaxiality ≤0.05 mm. Pre-assembly: Upper and lower half casing trial fitting, dimension recheck and clearance verification before shipment.
3. Quality Control & Inspection
Full traceable quality management system complying with Mitsubishi specifications and JB/T 7024 standards. Hold points available for customer or third-party witness inspection. Raw material & melting test: Spectral analysis on molten steel. Mechanical tests (tensile, yield, impact, hardness) on cast test blocks and body samples. Non-destructive testing (NDT): 100% UT, MT, PT inspection on split face, flange and thick-wall pressure regions to detect internal and surface defects. Precision dimensional inspection: Laser tracker / large coordinate measuring machine for full dimension scanning and geometric tolerance verification. Hydrostatic / air tightness test: Available upon request according to technical agreement. Full documentation package: Melting records, heat treatment charts, NDT reports, dimensional reports, material certificates. Final inspection: Visual check, permanent marking, anti-corrosion coating before delivery.
4. Customization Process
Technical discussion & review: Client provides Mitsubishi drawing, technical specification and operating conditions. Feasibility review on material, tolerance, NDT and lead time, sign technical agreement. Quotation & contract signing: Formal quotation after technical confirmation, define witness inspection and delivery terms. Process planning & simulation: Internal process development, MAGMA simulation, tooling design. Production & in-process inspection: Moulding, melting, casting, heat treatment, welding, rough & finish machining. Hold points for customer witness. Final inspection & pre-assembly: Complete NDT, mechanical and dimensional tests; upper & lower half casing pre-assembly and report issuance. Document handover & shipment: Full quality data package delivery; anti-rust protection and heavy-duty packaging for oversize transport. After-sales support: Technical consultation for site assembly and quality response during warranty period.

Anshan Leibo Metallurgical Equipment Manufacturing Co., Ltd. Registered Address:Yanlangzhai Village, Dadaowan Town, Qianshan District, Anshan City, Liaoning Province, P.R.China . All Rights Reserved © 2026