Paljet
valve body + integrated KE series electric actuator
KOSO KE series is a direct-acting electric control type, receiving 4~20mA analog signals, equipped with valve position feedback, used for continuous flow / pressure / liquid level regulation, distinguished from on-off electric valves.
1. KEP4 Electric Top-Guided Single-Seat Control Valve
Core Features:
Valve body: Top-guided single-seat structure, stable plug guidance, anti-oscillation; standard type, linear / equal percentage flow characteristics optional
Suitable for moderate differential pressure, simple structure, easy maintenance; good sealing performance, high leakage class; valve body WCB/SCS13A etc.
Actuator KE electric direct-acting, with valve position feedback, supports local manual operation, protection IP65
Applications:
Chemical industry, water treatment, HVAC, general petrochemical, clean liquids, low-pressure steam, gases
Conditions without cavitation or strong erosion; continuous regulation of liquid level, temperature, and pressure; medium and small pipe diameters DN15~DN150
Not suitable for high differential pressure, strong cavitation, or media containing large amounts of solid particles
2. KEM1 Electric Compact Sleeve Control Valve
Core Features:
Sleeve (cage) valve internals, noise reduction and anti-cavitation superior to single-seat; balanced valve core, lower actuator thrust requirement
Compact size (miniature), lightweight, small installation space; multi-hole sleeve optional to suppress noise
Flow characteristics: Linear / equal percentage, balanced valve core structure, small unbalanced force
Applications:
Chemical industry, fine chemicals, pharmaceuticals, light industry, medium differential pressure steam, liquids, gases
Applications with certain noise requirements and compact spaces; heat exchanger temperature regulation, process pipeline pressure control
Medium to high differential pressure conditions without severe cavitation; media containing small amounts of impurities (superior to single-seat, but not large amounts of particles)
3. KER1 Electric Small-Bore Single-Seat Control Valve (Micro-Flow Type)
Core Features:
Specialized for micro-flow, valve core with specially reduced structure, extremely small Cv; single-seat top-guided, extremely high regulation accuracy
Small valve body, mainly DN6~DN25; suitable for precise micro-amount control; valve core material option Stellite wear-resistant
Applications:
Fine chemicals, laboratory equipment, micro-dosing of additives, chemical injection, micro-feed of catalysts
Small flow, low differential pressure, clean media; micro-ratio dosing, pH chemical dosing; not suitable for large differential pressure or particulate media
4. KER2 Electric Single-Seat Control Valve (High-Temperature Type)
Core Features:
Top-guided single-seat, valve body and internals upgraded to high-temperature materials (WC6 / stainless steel + Stellite cladding); extended valve bonnet with heat dissipation structure
High-temperature resistant, reduces packing thermal aging; high-temperature graphite packing used; anti-thermal expansion seizing
Applications:
Power plants, petrochemical, heat transfer oil, high-temperature steam (high-temperature process fluids)
High-temperature media 250~450℃; high-temperature process loop temperature regulation; high-temperature water / steam systems
Note: Not suitable for strong cavitation or strongly corrosive media
5. KEW2 Electric High-Performance Butterfly Valve (Control Type, Line-Centered / Single-Eccentric)
Core Features:
90° quarter-turn electric control butterfly valve, wafer / flanged; line-centered / single-eccentric, rubber / PTFE soft seal; large diameter, low pressure drop, lightweight
KOSO KE electric quarter-turn actuator, 4~20mA continuous regulation; flow characteristics approximately equal percentage; significant cost advantage
Applications:
Water treatment, HVAC, flue gas, circulating water, low-pressure gases; large pipe diameters DN80~DN600
Low-pressure, ambient temperature clean media; circulating water regulation, HVAC heating and cooling media, low-pressure flue gas volume regulation
Limitations: Differential pressure cannot be too high, use with caution for high temperature / strong corrosion
6. KEW3 Electric Double-Eccentric High-Performance Butterfly Valve
Core Features:
Double-eccentric structure, valve disc detaches from valve seat instantly upon opening, small friction and longer sealing life; pressure resistance higher than KEW2, can reach PN16/PN25
Sealing options include PTFE / metal hard seal versions; quarter-turn electric control, suitable for frequent regulation
Applications:
Petrochemical, water treatment, natural gas, general process gases / liquids; medium pressure media, wider temperature range than KEW2
Process circulation pipelines, low-pressure steam, natural gas regulation; applications requiring frequent movement and long sealing life
7. KEW4 Electric Triple-Eccentric Metal Hard-Seal Butterfly Valve (Control Type)
Core Features:
Triple-eccentric structure, metal-to-metal hard seal; high-temperature and high-pressure resistant, erosion resistant; no sliding friction on the sealing surface when closed
Can be used for high temperature and high differential pressure; fire-safe structure; can be used for steam and high-temperature flue gas; quarter-turn KE electric actuator
Applications:
Power plants, metallurgy, petrochemical, high-temperature flue gas, superheated steam; high-temperature (up to 500℃), medium to high pressure gases / steam
Flue gas containing small amounts of dust, high-temperature process gases; conditions requiring both regulation and reliable shut-off; not suitable for strongly corrosive and highly abrasive particles
8. KEW5 Electric Fluorine-Lined Anti-Corrosion Butterfly Valve (Control Type)
Core Features:
Valve body lined with PTFE/PFA, valve disc coated with fluoroplastic; full lining anti-corrosion; soft seal; quarter-turn electric control
Resistant to strong acids, strong alkalis, and strongly corrosive media; carbon steel valve body with fluorine lining, cost superior to full stainless steel
Applications:
Chemical industry, pickling, chlor-alkali, sewage treatment strongly corrosive media: hydrochloric acid, dilute sulfuric acid, sodium hypochlorite and other corrosive liquids
Ambient temperature, low-pressure corrosive fluid regulation; upper temperature limit restricted by fluorine lining (generally ≤180℃), cannot be used for high temperature; cannot contain hard particles.
| Item | KEP4 | KEM1 | KER1 | KER2 | KEW2 | KEW4 | KEW5 |
|---|---|---|---|---|---|---|---|
| Nominal Diameter(mm) | 15-200 | 25-300 | 15-300 | 25-300 | 80-600 | 200-2000 | 50-500 |
| Rated KV | 3-547 | Linear 11-1600 Wq% 10-1300 | 21-7363 | 27-3907 | PN1.6:220-17990 PN4.0:158-14390 | 1080-15700 | 85-850 |
| Travel | 20 30 40 50mm | 16 25 40 60mm | 90° | 90 | 90° | 70° | 70° |
| (Allowable Differential Pressure) MPa: | 1.66--0.3 | 6.4--3.4 | 1.66-0.3 | - | 1.85--0.35 | 0.035--0.00007 | 0.6--0.020 |
| Nominal Pressure | PN1.6、4.0、6.4 ANSI 150#、300#、600#、JIS 10K、20K、30K | PN1.6、4.0、6.4,以及 ANSI 150#、300#、600#、JIS 10K、20K、30K | PN1.6, 4.0, 5.0, ANSI 150#, 300#, 600# | PN1.6, 4.0, 5.0, ANSI 150#, 300#, 600# | PN1.0, 1.6, ANSI 150#, 300# | PN0.25, 0.6, 1.0, ANSI 125#, 150# | PN0.25, 0.6, 1.0, ANSI 125#, 150# |
| Temperature | Normal Temperature):-17~+230℃,Moderate Temperature):-40~+450℃ | Soft seal -20~+220℃, hard seal -29~+425℃ | Soft seal -5~+180℃, hard seal -45~+400℃ | >Normal Temperature):-40~+200℃,Moderate Temperature):-45~+500℃ | >Normal Temperature):-40~+250℃,Moderate Temperature):-40~+450℃ | ||
| Flow characteristic | Eq%、Linear | Switch | Eq% | Inherent Characteristics | Approximate Equal Percentage Eq% | ||
| Body Materials | ZG230-450, SCPH2, WCB, ZG0Cr18Ni9, SCS13A, CF8, CF8M | 6.4--3.4 | WCB, CF8, CF8M, ZG1Cr18Ni9Ti | SCPH2, WCB, SCS13A, CF8M | Q235, 16MnR, 0Cr18Ni9 | ZG230-450, ZG0Cr18Ni9 | |
| Bonnet Style | Flanged GB/T9119 | Flanged ,GB/T9119, GB/T9115, HG/T20592, ANSI, JIS | Flange connection (soft seal DN25-300 GB9113; hard seal ANSI, GB9119) | Wafer Type, GB/T9119, ANSI, JIS | Wafer Type, GB/T9119, GB/T9115, ANSI, JIS | Flanged, JB/T81-94, ANSI, JIS | Wafer Type, GB/T9119, ANSI, JIS |
| (Leakage Class | IV、V | Class III, IV; Adjustable ratio: 50:1 | Soft seal Class VI; hard seal zero leakage | Fn/Fs type is ANSI Class VI; Cs/M/Ht type is 10−x 10−x rated capacity (DN80-150: ≤0.01% etc. | IV, V, VI | II, III | |
Note: The above information is released by KOSO and reviewed by Engineer Huang Zhi from PALJET.
Next product: 200 Series Valves